I/port software updates – ClearCube Grid Center Admin Guide 4.11 User Manual
Page 71
Grid Center 4.11 Administrator’s Guide
Appendix A: Using Grid Center with e100 and Capio I/Ports • 65
The default administrator ID/ password on the NeoLinux I/Ports is
root / clearcube
.
A default user ID/ password is not provided on the on the NeoLinux I/Ports.
For security reasons, these passwords should be changed. User accounts can be set
up individually via RDP or at the local desktop by the administrator. In addition, Grid
Center and ezRemote Manager can execute scripts on multiple I/Ports, offering an
effective tool for updating authentication credentials. XPe uses the standard Windows
tools and methods for account and password maintenance. The NeoLinux Grid
Center client provides its own password maintenance capability.
I/Port Software Updates
The Eon e100 and Capio One I/Ports use ezRemote Manager for operating system
updates. These brief procedures describe how to update or re-image Eon e100 and
Capio I/Ports. The ezRemote Manager User Manual provides complete details on
pushing software updates or re-imaging the I/Port.
To push a snapin:
1. In ezRemote Manager, select Neoware Appliances in the left pane.
2. From the Actions menu, select Assets.
3. In the window that is displayed, click the Password button and enter the
password for the I/Ports to be updated.
4. Highlight the I/Ports to receive the snapin.
5. Select the Snapin Manager icon (the icon with the red check mark).
6. Browse for the snapin and click OK.
To re-image:
1. In ezRemote Manager, select Neoware Appliances in the left pane.
2. From the Actions menu, select Assets.
3. In the window that is displayed, click the Password button and enter the
password for the I/Ports to be updated.
4. Highlight the I/Ports to receive the snapin.
5. Select the Software Update Manager icon (the icon with the floppy disk).
6. Browse for the image file and click OK.
The I8800 I/Port uses Grid Center for software updates. See Updates on page 55 for
more information. If your I8800 I/Port requires system re-imaging, contact ClearCube
Technical support (see Contacting Support on page 67).