DJI Lightbridge User Manual - Manual (Page 30)

©2014 DJI. All Rights Reserved. 30
4.4 DJI LIGHTBRIDGE App Settings
Setup the channels, transmission mode, master-slave mode, video source, HDMI, warning, signal diagnostic, etc.
in the settings:
[1] Channel Settings
Manually select the channel when the performance of auto-selected channel is not optimum. Shorter
yellow bar indicates better channel signal quality. Once the channel is selected manually, it cannot auto
switch, use this function cautiously.
Mode Description
Auto Automatically select the least interfered channel among the 10 channels. [Recommended]
Manual Manually select the channel. [Use cautiously]
[2] Transmission Mode
[1]
[2]
[3]
[4]
[5]
[6]
[7]