DJI Lightbridge User Manual - Manual (Page 7)

©2014 DJI. All Rights Reserved. 7
In the Box
Modules
Air System × 1 Ground System ×1
Air system paddle antenna ×2
Air system antenna ×3 Ground system antenna ×2
Air System Cables
GIMBAL cable ×1 (A)
If used with PHANTOM 2, connect cable to
reserved 6-PIN port on central board for air system
power supply and OSD info input.
DBUS cable ×1
Connect to flight control system DBUS port for
communication.
Air system power and CAN cable ×1
Connect to Air system GIMBAL port,
one end for power, the other for CAN port.
AV cable ×1
Connect camera’s AV output to AV input port.
HDMI cable (D-D) ×1
Connection for camera’s HDMI output.