DJI Lightbridge User Manual - Manual (Page 31)

©2014 DJI. All Rights Reserved. 31
Select a transmission mode to adjust the video quality:
Mode Quality Distance Resolution
Real time ★ ★★★★ 720p50/60
Smooth ★★ ★★★ 720p50/60
Full HD ★★★ ★★ 1080i50/60
Auto A transmission mode between 720p and 1080i will be
automatically selected depending on channel conditions.
Note
Transmission mode option is not available in dual video source setting.
[3] Master-Slave Mode Setting
When single air system is paring with more than one ground system. Master-Slave setting is required.
Master ground system can display video and relay control signal to the aircraft; slave ground system can
only display video. Steps to setup:
A) Tap “Master-Slave” option in DJI LIGHTBRIDGE App of the master ground system, make a note of the
master ID;
B) Tap “Master-Slave” option in slave ground system, enter master ID to connect.
[4] Video Source Setting
Dual video source input mode is available when connecting air system to a DJI HD gimbal. An extra video