Metrohm 700 Dosino - Manual (Page 48)

4.4 Warranty and Conformity
700 Dosino, Instructions for use 42
4.4 Warranty and Conformity
4.4.1 Warranty
The warranty on our products is limited to defects that are trace-
able to material, construction or manufacturing error which occur
within 12 months from the day of delivery. In this case, the de-
fects will be rectified in our workshops free of charge. Transport
costs are to be paid by the customer.
For day and night operation, the warranty is limited to 6 months.
Glass breakage in the case of electrodes or other parts is not cov-
ered by the warranty. Checks which are not a result of material or
manufacturing faults are also charged during the warranty period.
For parts of outside manufacture insofar as these constitute an
appreciable part of our instrument, the warranty stipulations of the
manufacturer in question apply.
With the regard to the guarantee of accuracy, the technical speci-
fications in the instruction manual are authoritative.
Concerning defects in material, construction or design as well as
the absence of guaranteed features, the orderer has no rights or
claims except those mentioned above.
If damage of the packaging is evident on receipt of a consignment
or if the goods show signs of transport damage after unpacking,
the carrier must be informed immediately and a written damage
report demanded. lack of an official damage report releases
Metrohm from any liability to pay compensation.
If any instruments and parts have to be returned, the original
packaging should be used if at all possible. This applies above all
to instruments, electrodes, burette cylinders and PTFE pistons.
Before embedding in wood shavings or similar material, the parts
must be packed in a dustproof package (for instruments, use of a
plastic bag is imperative). If open assemblies are enclosed in the
scope of delivery that are sensitive to electromagnetic voltages
(e.g. data interfaces etc.) these must be returned in the associated
original protective packaging (e.g. conductive protective bag).
(Exception: assemblies with built-in voltage source belong in a
non-conductive protective packaging). For damage which arises
as a result of non-compliance with these instructions, no warranty
responsibility whatsoever will be accepted by Metrohm.