Metrohm 700 Dosino - Manual (Page 8)

1. Overview
700 Dosino, Instructions for Use
2
If reagents are exchanged frequently then the
dosing unit can remain attached to the rea-
gent bottle while the dosing drive is simply
removed and attached to the next dosing
unit.
1.2 Application possibilities
700 Dosino dosing drives are supported by various Metrohm in-
struments and are suitable for a wide range of different applica-
tions.
Titration
The following Metrohm titrators can control 700 Dosinos as titra-
tion burets:
• 726/796 Titroprocessor (connection for four Dosinos as stan-
dard; can be extended for up to twelve Dosinos
* )
• 736 GP–Titrino (connection for two Dosinos)
• 751 GPD–Titrino (connection for two Dosinos)
• 758 KFD–Titrino (connection for two Dosinos)
Dosing
For complex dosing tasks, such as dosing controlled by time,
dosing rate or temperature, the preparation of standard solutions
and dilutions as well as pipetting or sample preparation the Dosino
can be used with the
• 711 Liquino
As auxiliary buret the 700 Dosino can be used with e.g. the fol-
lowing Metrohm instruments:
• 730 Sample changer (connection for up to twelve Dosinos * )
• 756 KF–Coulometer (connection for one Dosino)
• 746 Trace analyzer (connection for four Dosinos)
• 726 Titroprocessor (connection for four Dosinos as standard;
can be extended for up to twelve Dosinos
* )
• 736 GP–Titrino (connection for two Dosinos)
• 751 GPD–Titrino (connection for two Dosinos)
• 758 KFD–Titrino (connection for two Dosinos)
* Four Dosinos can be connected to the external bus of the control instrument via
a 729 Dosimat Interface. Up to three 729 Dosimat Interfaces can be operated in
cascade form on a single external bus.