Metrohm NIRS XDS RapidContent Analyzer - Manual (Page 56)

54 ▪▪▪▪▪▪▪
When the reference scan is finished, insert the
wavelength standard as directed.
Always place the standard into the instrument in
the same orientation, with the label parallel to
the long axis of the mounting plate.
Click “OK” when ready.
After the test is complete, a spectrum of the standard is shown in the upper right quadrant of the
screen. A tabular report is shown in the lower right quadrant, giving each peak, its nominal position
and its measured position. A typical screen is shown:
Double-click the lower right quadrant to see the full report.