Metrohm 857 Titrando - Manual (Page 21)

825 Lab Link, Instructions for Use 17
be checked and, if necessary, restarted. Inactive connects are
given the status “inactive”.
Name
Give your Titrando system a name that is unambiguous. This
name will only be shown in the list of connections.
TCP/IP address
Here you should enter the TCP/IP address that you assigned to
the particular 825 Lab Link hardware during installation / configu-
ration (see Section 2.2). Take care that you use the correct writing
form, e.g. one- and two-place numbers without any leading zeros.
When editing an existing connection it is not possible to alter this
field. If you subsequently find that the TCP/IP address of a de-
fined connection is incorrect then you should delete this connec-
tion and set up a new one.
Root path
At first the Default root path defined in Section 2.5.2 appears here.
You should now extend this path by adding the subfolder in-
tended for use with this connection. In this way you can differenti-
ate between the individual Titrando systems that are connected.
However, if you enter the same folder for all connections then the
amount of data in this folder and its subfolders will increase; this
has a negative effect on the performance, e.g. during manual
storage.
Tip: Use the possibility of placing one of your own terms in front
of the automatically assigned file name for a determination. This
avoids possible name conflicts. Please consult the PC Control /
Touch Control Instructions for Use of your Titrando system
(Method Options).
Mode
This parameter is fixed to “SERVER” and cannot be altered.
Status
For a new connection the status is “not available”. When editing
an existing connection the current status appears here.