Metrohm 857 Titrando - Manual (Page 27)

825 Lab Link, Instructions for Use 23
4.1.1 TCP/IP configuration
Via
2. SETUP System
and
1. Setup TCP/IP
you can access the required submenu for the configuration of the
IP address, Subnet Mask and Gateway:
*** Port:- / Menu Level:2 ***********
Setup TCP/IP
1. IP-Address
2. Subnet Mask
3. Gateway
4. MTU (512-1024)
5. BOOTP Client
Press <No.+ ENTER> (q=quit):
After you have made the appropriate entries you can return to the
main menu (Menu level:0) by pressing the <ENTER> key several
times.
4.1.2 Serial transmission parameters
The serial parameters of the 825 Lab Link are set correctly in the
factory for communication with a Titrando system. These settings
are:
•
19200 baud • Emulation: VT100
•
8 data bits
•
no parity
•
1 stop bit
•
no handshake