Metrohm 940 Professional IC Vario TWO/SeS/PP - Manual (Page 50)

3.15 Installing the detector
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭
940 Professional IC Vario TWO/SeS (2.940.2400)
3.15 Installing the detector
The 940 Professional IC Vario provides enough space for two detectors
and additional accessories in the detector chamber. The detectors are
available as accessories and are supplied with separate manuals.
Placing the detector in the instrument
Follow the instructions in the chapter Inserting the detector in the manual
for the detector.
Connecting the detector to the eluent path
Accessories For this step you need the following accessories:
￭ Coupling (6.2744.040)
￭ 2 × pressure screw (6.2744.010)
￭ Pressure screw, long (6.2744.090)
1 ￭ In the anion channel: Tighten the detector input capillary to the
Out output of the MCS using a long pressure screw (6.2744.090).
￭ In the cation channel: Connect the column input capillary and the
detector input capillary to one another using a coupling
(6.2744.040) and two short pressure screws (6.2744.070).