11 pulsation absorber, Figure 16, Connecting the inline filter – Metrohm 882 Compact IC plus – Anion – MCS User Manual
Page 45
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
882 Compact IC plus – Anion – MCS
■■■■■■■■
35
Installing the inline filter
Caution
Observe the flow direction marked on the filter housing for the connec-
tion of the inline filter.
2
3
2
4
1
Figure 16
Connecting the inline filter
1
Connection capillary
Connects the purge valve with the inline fil-
ter
2
PEEK pressure screws, short
(6.2744.070)
3
Inline filter (6.2821.120)
Protects against particles.
4
Connection capillary
Connects the inline filter with the pulsation
absorber.
1 Screw on the connection capillary running from the purge valve to
the input side of the inline filter using a pressure screw (6.2744.070).
2 Screw on the connection capillary running to the pulsation absorber
to the output side of the inline filter using a pressure screw
(6.2744.070).
3.11
Pulsation absorber
Note
The pulsation absorber is already installed in the newly delivered instru-
ment.
Caution
The pulsation absorber is maintenance-free and may not be opened.