Metrohm 882 Compact IC plus – Anion – MCS - Manual (Page 60)

3.15 Metrohm CO
2
Suppressor (MCS)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50 ￭￭￭￭￭￭￭￭
882 Compact IC plus – Anion – MCS
3.15.3 Installing the adsorption cartridges
For effective CO
2
removal, the air sucked through the degassing cell
should be as low in CO
2
as possible. To achieve this, the air is aspirated
through a CO
2
adsorption cartridge (6.2837.000) (26-4)..
Moisture can block the CO
2
adsorption cartridge. In order to prevent this,
a H
2
O adsorption cartridge (6.2837.010) (26-7) is connected upstream.
9
3 8 7 3
1 2 3 3 4
5
6
Figure 26 Adsorption cartridge holder
1 PEEK pressure screw, short
(6.2744.070) 2 Luer coupling (6.2744.120)
3 Clips
For fastening the adsorption cartridges. 4 CO
2
adsorption cartridge (6.2837.000)
For removing the CO
2
from the aspirated air.
3-layer filled, blue-brown-gray.
5 Adapter (6.1808.190)
For connecting the H
2
O adsorption cartridge
and CO
2
adsorption cartridge.
6 PVC tubing
For connecting the H
2
O adsorption cartridge
and CO
2
adsorption cartridge.