10 detector, 11 power connection, 12 interfaces – Metrohm 930 Compact IC Flex SeS User Manual
Page 102
7.10 Detector
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
94
￭￭￭￭￭￭￭￭
930 Compact IC Flex SeS (2.930.1400)
7.10
Detector
You can find the technical specifications for the detector in the detector's
manual.
7.11
Power connection
Required voltage
100 - 240 V ± 10% (autosensing)
Required fre-
quency
50 - 60 Hz ± 3 Hz (autosensing)
Power consump-
tion
￭
65 W for typical analysis application
￭
25 W standby (conductivity detector to 40 °C)
Power supply unit
￭
Up to 300 W maximum, electronically monitored
￭
Internal fuse 3.15 A
7.12
Interfaces
USB
Input
1 USB upstream, type B (for connection to the PC)
Output
2 USB downstream, type A
MSB
2 MSB Mini DIN 8-pin (female) (for Dosino, stirrer, remote lines, etc.)
Detector
1 15-pin high density DSUB (female)
Column recogni-
tion
for an intelligent column
Leak sensor
1 jack plug
Further connec-
tions
Auxiliary
1 15-pin DSUB (female)
Service
1 15-pin DSUB (female)