Metrohm 930 Compact IC Flex SeS - Manual (Page 41)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
930 Compact IC Flex SeS (2.930.1400)
￭￭￭￭￭￭￭￭ 33
3.10.2.1 Installing the eluent path
The eluent path is connected with the capillaries in and out.
1 Connect the capillary labeled with in with the output of the separa-
tion column using a short pressure screw (6.2744.070).
2 Use a long pressure screw (6.2744.090) to connect the capillary
labeled with out to the input of the MCS (see Chapter 3.11.2, page
37).
3.10.2.2 Connecting the regeneration solution
The regeneration solution is connected to the regenerant capillary.
Connecting the regeneration solution to the Dosino
For this step you need the following accessories:
￭ Dosino (2.800.0010)
￭ Dosing unit 50 mL (6.3032.250)
￭ Accessory kit: Flex/Vario: ChS (6.5000.030)
￭ IC equipment: Dosino Regeneration (6.5330.190)