Metrohm 887 Professional UV/VIS Detector - Manual (Page 10)

1.3 About the documentation ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 ￭￭￭￭￭￭￭￭ 887 Professional UV/VIS Detector
1.3 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.3.1 Modifications since previous version
This manual substitutes its previous version 8.887.8002EN, it includes the
following changes:
￭ The conditions for the adjustment of lamp settings are specified more
precisely (see "Evaluating the intensity spectrum", page 22) and (see
Chapter 6.5, page 30).
￭ In chapter Replacing the UV lamp, page 27 the pictures were
replaced to show the new lamp module, which allows the use of the
new halogen lamp.
￭ Pin assignment of the analog outpot added (see Chapter 8.2, page
37).
1.3.2 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the
second to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Warning
This symbol draws attention to a possible life hazard
or risk of injury.
Warning
This symbol draws attention to a possible hazard due
to electrical current.
Warning
This symbol draws attention to a possible hazard due
to heat or hot instrument parts.