Metrohm 887 Professional UV/VIS Detector - Manual (Page 28)

3.7 Connecting the instrument ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
20 ￭￭￭￭￭￭￭￭ 887 Professional UV/VIS Detector
3
4
1
2
Figure 7 Connecting detector output
1 Detector inlet capillary 2 Detector outlet capillary
PEEK capillary (6.1831.100)
3 Detector outlet
Labeled with OUT. 4 Pressure screw
3.7 Connecting the instrument
3.7.1 Connecting the instrument to the PC
Note
The instrument must be switched off when connecting the PC.
1 Connecting the USB cable
Connect the PC connection socket of the instrument to a USB con-
nector of the computer via the 6.2151.020 USB cable.
3.7.2 Connecting the instrument to mains supply
Warning
The power supply unit must not get wet. Protect it against the direct
effect of liquids.
Mains cable
Which mains cable is supplied depends on the location:
￭ 6.2122.020 with plug SEV 12 (Switzerland, …)