BridgeWave AR60X - Manual (Page 16)

AR60X Installation Manual
580­00517, rev B 10
3.4 Installation Tools
The following tools, not provided by BridgeWave, are required for installing the radio and the
antenna:
Screwdriver, slotted 0.1 inch (2.5mm) wide
Open­end wrench 11/32 (9mm)
Open­end wrench 9/16 (14mm), 2 ea.
Open­end wrench 1/2 (13mm)
Ratchet with 6 inch (15cm) extension and 9/16 inch (14mm) deep socket
Wire stripper/cutter/crimp tool (10­16 gauge)
Electrical tape
Fish tape for pulling cable
Cable tie wraps
Level
Hand­held DVM (digital voltmeter) with standard banana plug receptacles