BridgeWave AR60X - Manual (Page 20)

AR60X Installation Manual
580­00517, rev B 14
3.6 Antenna and Radio Installation
5. Install – Antenna
Slip antenna over pivot pin, ensuring that the elevation adjust pin is engaged with slot in adaptor
plate.
Figure 3­7
When the radios come from the factory, they are mounted on the back of the antenna in the
vertical polarization position, that is, the diamond marking (see figure 3­8 below) on the front of
the radio housing is to the right when viewed from the front of the radio. For horizontal
polarization, the radio needs to be removed from the antenna and rotated so the diamond is at the
top when viewed from the front.
Secure the antenna
with two (2) x 3/8­16
bolts, lock washer, flat
washer and nylon
washers attach antenna
to the alignment plate.