Barco MatrixPRO HD/SD-SDI - Manual (Page 40)

30 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
3. Operation
Establishing Groups of Inputs and Outputs
„
Use the following steps to remove a member of an input/output group:
1. Press and hold any output key other than the one to be removed, if that is the
case.
2. Press and release the key of the group member to be removed, either input or
output. Now, when any output key is pressed and held all members of the group
will light up except for the channel that has been removed.
Please note:
• If two or more input/output groups have been established, the members of each
can be viewed by pressing and holding one of the group's output keys.
• After the key has been released, the current output group and its single input
channel will remain lit.
• When an output key of the second group is pressed and held, its members will
light while the keys of the first group will become dark.