Barco MatrixPRO HD/SD-SDI - Manual (Page 63)

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 53
6. Upgrading Software
Uploading Files to MatrixPRO
réäç~ЗбеЦ=cáäÉë=íç=j~íêáñmol
„
Use the following steps to upload files to the MatrixPRO system:
1. Once communications have been established and verified, click on the "Open
script file to read and upload" button.
2. Select "Complete Load.sld" and click OPEN.
3. After several minutes, the loader utility will display several messages. Press OK
for each message that appears.
4. After several minutes, the loader utility will inform the user that the process is
complete. Once this is done, power down the MatrixPRO unit and turn it back on.
This action enables the software to take effect.
5. Close the loader utility.
6. Verify that the new software is in the system, by looking for the version numbers in
the MatrixPRO Command GUI.
7. Once you have verified the version number, perform a factory reset by opening
the MatrixPRO Command GUI and clicking on the Factory Reset button.