Barco MatrixPRO HD/SD-SDI User Manual
Page 51
MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
41
4. GUI Installation and Operation
GUI Operation
4. Select the next Group number index in the Group column. The keys of the original
Group 1 outputs will be grayed-out — indicating that they are no longer available
to assign to another group.
5. Click on the Group 1 index number again. Notice that the keys of all members of
that group will turn yellow.
6. To deassign members of a group, select the Group index for that group and click
the Remove Group key.
The Front Panel buttons will show the members of a Group:
•
Press and hold any one output key for a particular group.
•
The the switch-caps of members of that group, both input and output, will light.
•
When that key has been released, the output channels for that group will remain
illuminated, while the current input source for that set of output channels will also
remain illuminated.