Barco MatrixPRO HD/SD-SDI - Manual (Page 70)

60 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
_K==oÉãçíÉ=`зенкзд=mêçíçÅçä
Default Serial Parameters
aЙС~мдн=pÉêá~ä=m~к~гЙнЙкл
The following are the parameter settings for serial communication:
• Baud Rate = 57600 baud
• Parity = NONE
• Stop Bit = 1
• Data Bit = 8
• Echo = ON
• Flow Control = NONE
Note These are defaults, which can be changed using serial
commands. In Chapter 3, refer to the “
RS-232 Settings
Menu ” section for instructions.