Barco MatrixPRO HD/SD-SDI - Manual (Page 53)

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 43
4. GUI Installation and Operation
GUI Operation
„
Use the following steps to perform a sample sequence:
1. Two presets were configured and loaded earlier in this tutorial. Refer to the
“ Preset Save And Recall ” section for details.
2. Be sure that the two "On" boxes for sequences 1 and 2 are checked.
3. Set the delay for 3 seconds duration for each sequence.
4. Click the Start key.
5. Click the Video Switching Tab and watch the input assignments change every 3
seconds. Look at the front panel, and note that the input assignment for output
channel 1 is showing the same activity.
6. Click the Sequence Tab and stop the sequence.