BT 1500 - Manual (Page 18)

15
Quartet 1500 User Guide ~ 3rd Edition ~ 27th November ’01 ~ 4197
To change the handset
melody
There are 3 handset melodies
to choose from. The default
setting is melody one.
Press the QUICKDIAL
button.
Use the UP and DOWN
buttons to scroll through
the melodies. You will hear
a sample melody to help
you choose.
Press the QUICKDIAL
button to confirm the chosen
setting.
You will hear a
confirmation tone.
Quickdial
Quickdial
▲
▼
To adjust the earpiece
volume
During a call you can adjust
the earpiece volume using
the UP and DOWN buttons.
There are 4 levels, where
1 is the lowest and 4 is the
highest.
The default setting is 2.
When you reach either the
highest or lowest setting
you will hear two beeps.
▲
▼
To adjust the handset
ringer volume
You can adjust the handset
ringer volume when the
handset is not in use.
There are 3 settings, HIGH,
LOW and OFF.
The default setting is HIGH.
Press the DOWN button to
reduce the volume.
To switch the ringer volume
OFF, press the DOWN
button and hold for 2 seconds
until you hear a confirmation
beep.
To adjust the volume, press
and release
the UP button.
The ringer will be set to the
LOW level.
Press and release the UP
button again to set the
volume to HIGH.
You will hear a sample ring
on each press.
▼
▼
▲
▲