BT 1500 - Manual (Page 35)

32
Quartet 1500 User Guide ~ 3rd Edition ~ 27th November ’01 ~ 4197
To check for messages
Dial your phone number
and wait.
When you hear your
outgoing message, press the
✱
button on your phone.
You will hear, “Please enter
your security code”.
Enter your security code.
If you have messages, you
will hear, “You have ‘n’
messages”.
Your messages will be
played.
If you have no messages,
you will hear, “You have no
messages, to hear main
menu press 1”.
You have 15 seconds to
enter any other instructions
before your Quartet 1500
hangs up.
Operating the
answering machine
When you have accessed your
answering machine, you can operate
it using the keypad numbers on the
phone you are using.
Time saver
The Time saver feature is useful if
you are out and want to ring in and
check if you have received any new
messages.
If your answering machine is set to
time saver you can check whether
you have new messages or not before
your answering machine actually
answers your call. If you have new
messages your answering machine
will answer after 2 rings, if you do
not have any new messages, it will
not answer until 6 rings. This enables
you to hang up before you are
connected, saving you time and the
cost of a call.
Time saver is the default setting but
if you have changed this see page 25
to set it back again.
Note
If you enter your security PIN code
incorrectly, after the second attempt,
your Quartet 1500 will announce:
“Thank you for calling” and will
then hang up.