BT 1500 - Manual (Page 39)

36
Quartet 1500 User Guide ~ 3rd Edition ~ 27th November ’01 ~ 4197
To re-register an additional
handset
Before re-registering, the
old registration code must
first be erased. Once erased
you can re-register your
additional handset by
following the registration
process on page 35.
Note
Check that your additional handset
is registered correctly by pressing
the
TALK button and listening for
a dial tone. If you do not hear a
dial tone your additional handset
is either out of range of the base
unit or it has not been registered
properly, or the base unit line cord
is not plugged in.
To set the handset number
Each additional handset
must be assigned an identity
number (3 or 4). Your
Quartet 1500 handset is
already registered as
HANDSET 1. A Quartet
additional handset is pre-set
as HANDSET 2. However,
further additional handsets
can be numbered as they
are added.
To de-register an
additional handset
Press the QUICKDIAL
button.
Press the CHANNEL button,
on the handset you wish to
de-register.
Press the
✱
button 4 times.
Press the QUICKDIAL
button.
You will hear a confirmation
tone.
Your old registration code
is now erased and you can
re-register your additional
handset following the
procedure on page 35.
Quickdial
Channel
Your additional handset is
registered automatically and
you will hear a long
confirmation beep and the
IN USE light will stop flashing.
Note
The following erasing and
re-registering procedure can be used
for re-registering an original
handset. If you wish to re-register
please follow the instruction below,
using your original handset where
it refers to additional handset.
Quickdial