Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 10)

10
4. Slide the short guiding rail on the Mounting Plate (d1) into the
guiding rail slot on the Dovetail Bar Clamp (d2) and secure it
in place using the hand knob as shown in Fig. 17.
Fig. 17
Fig. 18 Fig. 19
5. Slide the Dovetail Bar (a) into the Portrait Mounting Plate (d) and secure using the hand screw as shown in Fig. 18 and Fig. 19.
6. Loosen the altitude clutch knob located on the AllView mount’s fork arm, and turn the altitude axis so that the dovetail holder in
parallel to the ground. Retighten the clutch knob.
Note: When assembling the Portrait Mounting Plate (d), make sure that the Mounting Plate (d1) is positioned high enough to prevent the
¼-20 screw from obstructing the Dovetail Bar’s (a) path when you assemble the two pieces. Once the Dovetail Bar (a) is attached, you can
re-adjust this distance as needed.
d1
d1
d1
a
a
d2
d2
d2