Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 43)

43
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Rated Instrument Weight: 9 lbs (4 kg)
Power Supply: 8V to 15V DC 1Amp (Tip positive)
Motor Type and Resolution: DC Servo Motors
Slew Speeds: Rate 0 = 1.0x
Rate 1 = 2.0x
Rate 2 = 8x
Rate 3 = 16x
Rate 4 = 32x
Rate 5 = 200x
Rate 6 = 400x
Rate 7 = 600x
Rate 8 = 800x
Rate 9 = 1000x
Tracking Rates: Sidereal, Lunar, Solar
Tracking Mode: Dual Axes Tracking
Alignment Method: Brightest-Star Alignment, Two-Star Alignment
Database: 25 user defined objects. Complete M, NGC, IC and SAO
catalogues - total 42,900 objects
Go-To Pointing Accuracy: Up to 5 arc min
AllView™ Mount and SynScan™ AZ SPECIFICATIONS
Appendix C – Technical Specifications