Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 9)

9
WARNING
Do not over tighten the ¼-20 mounting screw or damage may occur to the screw or camera body
Portrait Orientation:
1. The Portrait Mounting Plate Assembly (d) is made up of two pieces – the Mounting Plate (d1) and the Dovetail Bar Clamp (d2). To
separate them, loosen the hand screw as shown in Fig. 13 and Fig. 14.
Fig. 13 Fig. 14
Fig. 15
Fig. 16
2. Slide the Mounting Plate (d1) and the Dovetail Bar Clamp
(d2) apart as in Fig. 15.
3. Attach the Mounting Plate (d1) to your camera using the ¼-20
screw as shown in Fig. 16.
Mounting Plate
(d1)
(d1)
(d2)
Portrait
Mounting
Plate Assembly
(d)
Dovetail Bar
Clamp (d2)