Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 6)

Fig. 3
Fig.4
4. Attach the accessory tray by sliding it along the primary
locking shaft until it pushes against the tripod legs. Secure the
locking knob, as shown in Fig. 3.
5. Install the hand control holder by sliding it into the accessory
tray notch as shown in Fig 4. Push until it locks in place.
Assembling and Installing the Mounting Bracket
The mounting bracket assembly includes four components: Dovetail Bar (a), Guiding Rail (b), Landscape Mounting Plate (c) and Portrait
Mounting Plate (d) as shown in Fig. 5.
Fig.5
(a) Dovetail Bar
(b) Guiding Rail (c) Landscape
Mounting Plate (d) Portrait
Mounting Plate
6