Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 8)

8
6. Use the ¼-20 mounting screw on the Landscape Mounting Plate to attach your camera, camcorder or telescope optical tube as
shown in Fig. 10 and Fig. 11.
WARNING
Do not over tighten the ¼-20 mounting screw or it may cause damage to the screw or camera body
Fig. 10 Fig. 11
7. The camera position may be adjusted in 3-dimensions on the mounting bracket, as shown in Fig. 12, by:
a. Up and down (Z axis) – adjust the Dovetail Bar in the fork arm dovetail holder
b. Forward and backward (Y axis) – adjust the Landscape Mounting Plate along the Guiding Rail
c. Left and right (X axis) – adjust the camera mounting bolt on the Landscape Mounting Plate
Fig. 12
Z
X
Y