Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 7)

7
The mounting bracket can be configured in two ways to hold a camera in landscape or portrait orientation.
Landscape Orientation:
2. Now attach the Landscape Mounting Plate (c) to the
Guiding Rail (b) as shown in Fig. 7.
1. Attach the Dovetail Bar (a) to the Guiding Rail (b) using the
hand screw as shown in Fig. 6.
3. Slide the Landscape Mounting Plate (c) along the Guiding Rail (b) back and forth to find a suitable position for the camera you are
attaching. Tighten the hand screw on the Landscape Mounting Plate (c) to secure it in place.
4. Loosen the altitude clutch knob on the AllView mount’s fork arm, as shown in Fig. 8, and turn the altitude axis, so the dovetail
holder is in a vertical position. Retighten the clutch knob.
5. Loosen the Dovetail Holder’s hand screw located on the fork arm and slide the mounting assembly into the dovetail holder.
Tighten the hand screw. The mount should now look like Fig. 9.
Fig. 6
Fig. 9
Fig. 8
Fig. 7
b
b
a a
c