Soleus GPS Draft (SG200) - Manual - Manual (Page 3)

GPS Draft – Instruction Manual
Step 5) Go for a Ride:
5.1) Using Bike mode:
5.1.1) Press S7 from Time mode to go to BIKE mode. The Bike computer will display
GPS/ INDOOR.
5.1.2) Press S1/S11 to select between GPS and INDOOR.
5.1.3) Press S5 to confirm your selection. If you select GPS, the bike computer will
start to search for GPS signal. If you select INDOOR, you will have your
exercise with no GPS.
5.1.4) Another way of going to BIKE mode is by pressing S1 from Time mode.
o The computer will display the GPS / INDOOR selection screen. Press S1 to
select and then press S5 to confirm. If you select GPS, the bike computer will
start searching for the GPS signal and go to Bike mode.
o If GPS is already ON when you press S1, the computer will automatically go
to GPS GO screen.
5.1.5) While the computer is searching for the GPS Satellite signal, press S5 to view
the remaining BATTERY power level, remaining DATA TRACK MEMORY and
then display the GPS GO screen.
5.1.6) Press S1 to START.
5.1.7) Press S11 to take manual Lap. If auto lap function is set, the Bike computer will
take lap automatically based on auto lap setting in SET mode. There is also a
beep sound during taking an auto lap function. The Bike Computer will display
the Lap number, Lap time, and Split Time for 10 seconds and continue running.
5.1.8) Press S5 to change the information displayed in Row 1 . Following are the
information displayed as you press S5:
o
GPS GO screen – This view will be hidden when chrono is already running.
o Speed / Distance / Chrono
o Calorie / Distance / Chrono
o Odometer / Distance / Chrono
o Chrono / Distance / Chrono
o Distance / Distance / Chrono
5.1.9) Line 2 and Line 3 information can be changed in SET mode / VIEW.
Note: The computer will remember your previous screen view the next time you
come back to BIKE mode.
5.1.10) Press S1 to stop after completing your run.
5.1.11) Press S5 while the chronograph is stopped to view your current data before
saving. Following are the information as you press S5:
o Distance / Chrono / Stop
o Chrono / ODO / calorie
o Calorie/ Ave Speed / Max Speed
5.1.12) Press S11 or press and hold S1 to save your run data.
Notes:
o Before going for a bike exercise, it is highly recommended that you set your user
profile first so that the calories will be calculated properly. Go to SET mode/USER.
o When the Chronograph is stopped and reset in BIKE mode, if no activity for 10
minutes, the GPS will go to Standby mode and return to TIME mode.
o While in Bike mode, then the GPS signal suddenly becomes weak lost for any
reason, the Bike computer will display LOST GPS signal until it receives GPS
signal again.
o Maximum of 15 hours track record / 30 data files/ 100 laps for each data file can
be saved in memory.
BIKE setting mode:
•
Press and hold S11 from any bike mode to enter BIKE setting mode. The computer will
display HOLD SET and then AUTO LAP start to blink.
• Press S1/S11 to scroll through the parameters to set namely AUTO LAP, UNIT, USER,
ODO, and VIEW.
Setting the Auto Lap:
• Press S5 while AUTO LAP is blinking. The computer will display the auto lap setting.
Default value is 1 KM.
• Press S1 or S11 to select Auto lap setting options (0.5, 1, 2, 3, 4, 5 and OFF).
• Press S5 to enter the selected setting. ALERT ON or OFF will start to blink.
• Press S1/S11 to change the setting.
• Press S5/S7 to exit setting.
Setting the UNIT:
• Press S5 while UNIT is blinking. KM or MI will start to blink.
• Press S1 or S11 to select KM or MI.
• Press S5/S7 to confirm and go back to UNIT setting screen
Setting USER details:
•
Press S5 while USER is blinking. MALE or FEMALE will start to blink.
• Press S1/S11 to select. Press S5/S7 to set the AGE.
• Press S1/S11 to change the value. Press S5/S7 to set the WEIGHT.
• Press S1/S11 to change the value. Press S5/S7 to set the HEIGHT
• Press S1/S11 to change the value. Press S5/S7 to go back to USER setting screen.