Soleus GPS Draft (SG200) - Manual - Manual (Page 5)

GPS Draft – Instruction Manual
General Operations
The Bike computer has the following main modes: Time, Bike, Chronograph, Data, Alarm and
Set modes. Press S7 to scroll through these modes. Press S1 from Time mode will also go to
Bike mode.
EL backlight:
This Bike Computer has a Night mode function. Following are the options in SET mode and
their functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds. (Default)
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when CHRONO is running from 5:00 pm to 7:00 am
by default. However, Start (ON) time and END (OFF) Time for the NIGHT function can be
changed in Set mode.
TIME mode
Ø Press S7 from SET mode to TIME mode. The bike computer will momentarily display
TIME and then display Time 1. It has dual time T1 and T2.
Ø Press & hold S1 to change T1 to T2 or vice versa. Please take note this is press & hold
S1. If you just press S1, it will display the GPS/INDOOR selection screen.
Ø Time 1 does not display the city code or T1. Only Time 2 will display the City code or T2
if time is set manually.