Soleus GPS Draft (SG200) - Manual - Manual (Page 6)

GPS Draft – Instruction Manual
TIME setting mode:
• Press and hold S11 to enter Time setting mode. The bike computer will display HOLD
SET and then TIME will start to blink.
• Press S1/S11 to toggle through the parameters to set namely TIME, NIGHT,
CONTRAST, and CHIME.
Setting Time:
•
Press S5 while TIME is blinking. T1 will start to blink.
• Press S1/S11 to select which time to set, T1 or T2.
• Press S5 to confirm. GPS or MANUAL will start to blink.
• Press S1/S11 to select between GPS or MANUAL and then press S5 to confirm.
Note that you have two options in setting the Bike computer, GPS or MANUAL. In manual
setting, you can manually set the time. If you select the GPS option, the Bike computer will
be automatically set base on the data and time data from GPS satellites.
GPS setting:
o Set TIME ZONE by pressing S1/S11 and then press S5 to enter.
o Set DST ON or OFF by pressing S1/S11 and then press S5 to enter.
o Set 12H or 24H format setting by pressing S1/S11. Press S5 to enter.
o Set M-D or D-M display format by pressing S1/S11. Press S5 to enter
MANUAL setting:
o Set the HOUR by pressing S5 and press S1/S11 to change digit then press S5 to
enter.
o Set the MINUTE by pressing S5 and press S1/S11 to change digit then press S5 to
enter.
o Set the SECOND by pressing S5 and press S1/S11 to change digit then press S5 to
enter.
o Set the YEAR by pressing S5 and press S1/S11 to change digit then press S5 to enter.
o Set the MONTH by pressing S5 & press S1/S11 to change digit then press S5 to enter.
o Set the DAY by pressing S5 and press S1/S11 to change digit then press S5 to enter.
o Set the 12/24H by pressing S5 and press S1/S11 to change digit then press S5 to
enter.
o Set M-D or D-M display format by pressing S1/S11.
o Press S5/S7 to exit to TIME setting screen.
Setting NIGHT:
•
Press S5 while NIGHT is blinking. The computer will display 10 seconds blinking.
• Press S1/S11 to change to 20 sec or NIGHT ON.
• While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to
NIGHT setting screen.
• While on NIGHT ON setting screen Press S5 to accept the ON setting. The computer will
display the START TIME.
• Press S1/S11 to toggle between START TIME and END TIME.
• Press S5 or 3 seconds auto to set the START TIME. Hour digit will start to blink.
• Press S1/S11 to change the hour setting.
• Press S5 to change the MINUTE. Minute digits will start to blink.
• Press S1/S11 to change the minute setting.
• Press S5 to go back to START TIME setting screen.
• Press S1/S11 within 3 seconds to set the END TIME. If you fail to press S1/S11 within 3
seconds, it will auto enter the HOUR digit of the START TIME. Hour digit will start to
blink.
• Follow the procedure in setting the START TIME.
• Press S7 to exit.
CONTRAST setting in TIME mode:
•
Press S5 while CONTRAST is blinking. Contrast percentage will start to blink.
• Press S1/S11 to change to your desired value. LCD Contrast range is from 10 to 100%.
• Press S5/S7 to exit to CONTRAST setting screen
CHIME Setting in TIME mode:
•
Press S5while CHIME is blinking. The computer will display CHIME ON.
• Press S1/S11 to change to CHIME ON or OFF.
• Press S5/S7 to confirm and exit to CHIME setting screen