Ultra-cut 400 xt – Tweco 400 XT Ultra-Cut Plasma Cutting System User Manual
Page 50
Advertising
ULTRA-CUT 400 XT
3-28
INSTALLATION
Manual 0-5275
Coolant Return (Red)
Coolant Supply (Green)
Art # A-12062
Green
Red
2. Refer to illustration. Connect the Pilot wire and Negative cables using a star washer on each.
NOTE
* Slave and Master refer to only those set ups using two power supplies in parrallel. Slave is not used in single
system operations.
Advertising