Weller WR2 - Manual (Page 24)

4-20 WR 2
2 For your safety
Repair station WR 2 is manufactured in accordance with the current
state of the art and acknowledged regulations concerning safety.
There is nevertheless the risk of personal injury and damage to
property if you fail to observe the safety information set out in the
accompanying booklet and the warnings given in these instructions.
Always give out the repair station WR 2 to third parties together with
the operating instructions.
2.1 Intended use
Repair station WR 2 may only be used for the purpose specified in
the operating instructions, i.e. for soldering and desoldering under
the conditions specified therein. The conditions for intended use of
repair station WR 2 also require that you
− adhere to these instructions,
− observe all other accompanying documents,
− comply with national accident prevention guidelines at the place of
use.
The manufacturer will not be liable for unauthorised modifications to
the appliance.
3 Included in delivery
− Repair station WR 2
− Power cable
− Equipotential bonding connector
− Repair station WR 2
− Safety information booklet