Weller WR2 - Manual (Page 30)

10-20 WR 2
2 s ➾ Menu 1
4 s ➾ Menu 2
1x ➾ ON/OFF
6.4 Soldering and desoldering
Z Carry out soldering work as directed in the operating instructions
of your connected soldering tool.
7 Special functions
The special functions are divided into 2 menu levels:
−
Menu 1 with setting options for
Standby temperature, temperature switch-off (Setback), automatic
switch-off time (Auto-OFF), temperature offset, window function,
temperature units, switch-on time (On Time) for hot air pencil,
vacuum switch-off delay (VAC OFF), vacuum switch-on delay
(VAC ON) and locking function.
− Menu 2 with setting options for
pressure gauge level, ID code, calibration function (FCC), Pick-up
power, autom. channel changing ON / OFF, keylock ON / OFF
and control characteristic HI / LO.
7.1 Selecting special functions of Menu 1
Special functions Navigation
STANDBY
SETBACK
AUTO OFF
OFFSET
WINDOW
°C/°F
ON TIME
VAC OFF
VAC ON
↑
↓
EXIT
CH changing
┌ 1 ┐
┌1·2┐
┌ 2 ┐
AIR
1. Select the required channel ┌ 1 ┐ or ┌ 2 ┐ for the entry of special
functions.
2. Press and hold down the UP and DOWN buttons simultaneously.
"– 1 – appears on the display after 2 s.
3. Release the buttons.
Selection of the special functions of Menu 1 is activated.
The settings can now be made.
- Select menu items using the ┌ 1 ┐ and ┌1·2┐ buttons.
- Exit the menu again with button ┌ 2 ┐ (EXIT).
- Change channel using the AIR (12) button.