ClearOne Converge Pro - Manual (Page 153)

148
As shown above, the Center Pane displays a signal flow diagram for the Telco/VoIP Tx channel, real-time peak-
level meters, as well as the channel routing matrix, which shows the audio routing configuration for the channel.
Configuration settings for the Telco/VoIP Tx channel are displayed as controls (buttons, sliders, etc.) which are
located at the appropriate stage in the signal flow.
The following sections describe how to use these controls to configure Telco transmit settings for your installation.
Channel Label
Rename the channel by entering a name in the Label entry field (optional). Label changes are global, and appear
throughout Console wherever the label is referenced.
Dialer Button
The Dialer button opens the telephone dialer (shown below), allowing you to place calls to establish a conference
call with a remote location.
See Dialer for more information on using the dialer and its features .
NOM (Number of Open Mics/Constant Level)
Maintains a constant output level by automatically adjusting gain levels based on the number of mics gated on
and routed to the selected output channel. NOM reduces the output level proportionally by 3dB for every doubling
in the number of open mics. When using NOM over the expansion bus, only I – R Buses support passing NOM
information. The default is On.
Mute Button
Clicking the Mute button toggles muting. The default is Off.