ClearOne Converge Pro - Manual (Page 277)

272
DELAY – Delay Adjust
This command selects/reports the setting of delay time.
Command Form : DEVICE DELAY <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5 (P) -
Value Unsigned Float 2 0.00 – 250.00
(Null to query in text)
Ms
DELAYSEL – Delay Select
This command selects/reports the delay activation of an assignable processing channel.
Command Form : DEVICE DELAYSEL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 5 (P) -
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
-
DEVICENAME – Argument Identification Label
This selects/reports the Device Argument identification label of the specific channel.
COMMAND FORM : DEVICE DEVICENAME <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 1, 2, 3, 7
(I, O, M, L)
-
Reserved Unsigned Integer 2 0 -
Label String 12 1 – 12 characters
CLEAR = clear the label
(Null to query in text)
-
DEVICESUBTYPE – Sets the Subtype of a Connected Device
This command enables/disables or reports the current type of device connected to an input or output.
Command Form : DEVICE DEVICESUBTYPE <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 1, 2, 3, 7 (I, O, M, L) -
Value Unsigned Integer 2 (NULL to query in text) -
DEVICETYPE – Sets the Type of a Connected Device
This command enables / disables or reports the current type of device connected to an input or output.
Command Form : DEVICE DEVICETYPE <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 1, 2, 3, 7 (I, O, M, L) -
Value Unsigned Integer 2 (NULL to query in text) -