Cambridge Audio Multi-room speaker system - Manual (Page 17)

Incognito multi-room 17
Incognito multi-room
KP10 AA-B BUS keypad
The KP10 EU version should be fitted into a standard single UK
(square) 47mm deep back-box (the stainless steel/silver KP10 EU
should be fitted into a 50–60mm deep back-box/pattress).
The KP10 CU version should be fitted into a standard single US J-
box.
The Cat5 cable running from the AH10 is terminated at the 8-way
colour-coded punch down connection on the rear face of the KP10.
Speaker cable is connected via screw terminals on the rear of
the KP10.
The KP10 should be positioned at a height of 138 cm from the floor
finish (to centre of keypad) or taking into account light switch
locations etc.
It should also be placed 25-35 cm away from the outer edge of any
door frame or wall edge.
Locate away from direct, bright sunlight which may affect infra-red
performance.
Full instructions for installing your KP10 are supplied with the
keypad.
Cat-5 cable Cat-5 cable
Speaker cable Speaker cable
KP10 CU version KP10 EU version