Cambridge Audio Multi-room speaker system - Manual (Page 7)

Incognito multi-room 7
Where aa VVH10 vvideo sswitcher hhas bbeen sspecified
The VH10 is linked to the AH10 via a Cat-5e patch cable (supplied
with the VH10), connected to the expansion sockets on both units.
This provides power, and input switching commands direct from the
system remote control or KP10.
Main video displays are connected to the VH10 at the ‘main zone’
sockets via high quality RG6/CT100 co-axial cable terminated at
the VH10 by a phono/RCA plug. No external power is required by the
VH10 it is powered by the AH10.
Sub-zone video displays are connected in the same way, but to the
four sub-zone sockets on the VH10.
SS10
SS10
PS10
Connections between AH10 and VH10 with two main zones and a
sub-zone attached
VIDEO CONNECTIONS
Incognito multi-room
SUB-ZONE
MAIN ZONE
Cat5
Cat5
Coax cable
Coax cable