Cambridge Audio Multi-room speaker system - Manual (Page 4)

4 Incognito multi-room
Before llaying ccable oor iinstalling aan IIncognito ssystem iit iis iimportant
that yyou ccheck aand ccomply w with aall bbuilding rregulations oor bbuilding
code aapplicable tto yyour ccountry, sstate oor aarea. IIf yyou aare iin aany
doubt ccontact yyour llocal bbuilding rregulations/code oofficer aand/or
seek pprofessional aadvice ffrom aa ssuitably qqualified pperson.
Read iinstructions – All the safety and operating instructions should
be read before the product is operated.
Retain iinstructions – The safety and operating instructions should
be retained for future reference.
Heed w warnings – All warnings on the product and the operating
instructions should be adhered to.
Follow iinstructions – All operating and use instructions should
be followed.
Cleaning – Unplug all system components from the wall outlet
before cleaning any part of the system. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Attachments – Do not use attachments which are not recom-
mended by the manufacturer as they may cause hazards.
Water aand m moisture – Do not install the AH10/PS10 near water –
for example, near a bath tub, wash bowl or kitchen sink; in a wet
basement, or near a swimming pool etc.
Wall oor cceiling m mounted lloudspeakers – should be mounted to a
wall or ceiling only as recommended by the manufacturer. Installer's
should also ensure that all building regulations are strictly adhered
to as cutting a hole for a loudspeaker may affect the fire rating of a
ceiling or wall.
SAFETY PRECAUTIONS
Accessories – Do not install any part of the system on an unstable
surface, stand, bracket or table. The product may fall, causing
serious injury to child or adult, and serious damage to the product.
Use only a surface, stand bracket or table recommended by the
manufacturer, or sold with the product. Any mounting of the product
should follow the manufacturer's instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and stand combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the combi-
nation to overturn.
Ventilation – Slots and openings in the cabinets/enclosures are
provided for ventilation and to ensure reliable operation of the
product and to protect them from overheating. These openings must
not be blocked or covered. The openings should never be blocked by
placing the product on a soft surface. The AH10 should not be
placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s instructions
have been adhered to. For all components, the manufacturers
instructions on ventilation must be adhered to.
Power ssources – The PS10 should be operated only from the type of
power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer
or local power company.
Grounding oor ppolarization – In some countries the PS10 may be
equipped with a polarized alternating-current line plug (a plug
having one pin wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug into the outlet, try reversing the plug. If the plug still