Panning and tilting the flir camera, Zooming the flir video image, The flir camera source options – B&G Zeus2 Glass Helm CPU User Manual

Page 100: The flir camera’s home position

Advertising
background image

Ú

Note:

Only one FLIR camera can be connected to the Ethernet network.

When you activate a video panel, the system will start searching the network for a FLIR
camera.
If the connection later is lost, this will be indicated by a panel key. Select this key to
reestablish the connection.
When the connection is established the menu will change to include access to FLIR camera
control.

Ú Note:

You can take over camera control from any Zeus

2

Processor unit connected to the

Ethernet network.

Panning and tilting the FLIR camera

When the connection to the FLIR camera is established, pan and tilt panel buttons appear on
the video panel. The left and right arrow buttons control the camera’s pan, while the up and
down arrow buttons tilt the camera.
Select one of the arrow buttons on the panel to control the camera. The camera will move as
long as you press the button.

Zooming the FLIR video image

You zoom the video image by using the zoom panel buttons.
There are two zoom options available, depending upon your selected FLIR camera source
option:

Digital zoom

Only available when the camera is in Infrared
mode.
In this mode, the zoom is represented in
levels (0, 2 and 4 times zoom). Each press on
a zoom button will increment or decrement
the zoom level.

Optical zoom

Available in daylight mode.
In this mode, the camera will zoom as long
as you press a zoom panel button.

The FLIR camera source options

The FLIR camera includes both daylight and infrared video sources.
When the infrared source is selected, the following options are available:

Toggle color scheme

Cycles through FLIR’s video output color scheme. Each of
these schemes maps a different color to a different
temperature

Toggle polarity

Inverts the color scheme.
For example, instead of: White = Hot and Black = Cold, it will
become Black = Hot and White = Cold

The FLIR camera’s home position

You can set the current pan and tilt position as the camera’s home position.
You can later quickly return to this camera position.

100

Video

| Zeus

2

Glass Helm

Advertising