B&G Zeus2 Glass Helm CPU - Manual (Page 37)

Only two routepoints can be selected, and the system will discard any routepoints
between your selected start and end points
3. Select Accept to start the automatic routing
- When the automatic routing is completed the route will appear in preview mode, and
the legs are color coded to indicate save or unsafe areas. Navionics uses red (unsafe)
and green (safe), while C-MAP uses red (unsafe), yellow (dangerous) and green (safe).
4. Move any routepoints if required when the route is in preview mode
5. Select Keep to accept the routepoints positions
6. Eventually repeat step 2 (Selection) and step 3 if you want the system to automatically
position routepoints for other parts of the route
7. Select Save to complete the automatic routing and save the route
Autorouting and Easy Routing examples
• Entire route option used when first and last route points are selected.
First and last routepoint Result after automatic routing
• Selection option used for autorouting part of a route.
Two routepoints selected Result after automatic routing
Waypoints | Zeus 2 Glass Helm 37