Video18video, The video panel, Setting up the video panel – B&G Zeus2 Glass Helm CPU User Manual

Page 99: Flir camera control, Establishing connection with the flir video camera, Video

Advertising
background image

Video

The video function allows you to view videos or camera sources on your system.

Ú

Note:

The video images will not be shared via the Ethernet network. You can only view the

video on the unit connected to the video source.

If a FLIR camera is available on the Ethernet network, you can display the video and control
the camera from the system.
For information about how to connect the camera, see the separate Zeus

2

Glass Helm

Installation manual.

The Video panel

A video panel can be set up as a single panel, or as one of the panels on a multiple panel
page.
The video image will be proportionally scaled to fit into the video panel. Areas not covered
by the image will be colored black.

Setting up the video panel

Video source
Zeus

2

Processor supports two video input channels. You can select to view one channel only,

or to cycle the image between available video cameras.
The cycle period can be set from 5 to 120 seconds.

Video standard
Zeus

2

Processor supports NTSC and PAL video. The two channels are set up individually.

Check the local video standard or the standard of your cameras.

Adjusting the video image
You can optimize the video display by adjusting the video image settings. The settings are
adjusted individually for each video source. Default for all settings: 50%.

FLIR camera control

When the connection is established to a FLIR camera, the menu will change to include
access to FLIR camera controls.

Ú Note:

You can take over camera control from any Zeus

2

Processor connected to the Ethernet

network.

Establishing connection with the FLIR video camera

When a video panel is active, the Zeus

2

Processor will automatically recognize a Flir camera if

it is available on the network.

Ú

Note:

When there is a DHCP server present on the Ethernet network, the FLIR camera will

need to be configured and set to have a Static IP Address before the connection can be
established. For instructions on how to configure your specific FLIR camera model please
refer to FLIR documentation.

18

Video

| Zeus

2

Glass Helm

99

Advertising