B&G Zeus2 Glass Helm CPU - Manual (Page 48)

Autopilot mode indication in the Status bar
The Status bar will show autopilot information as long as an autopilot computer is connected
to the network.
Icons will be included if the autopilot is passive or locked by another autopilot control unit.
Autopilot pop up
You control the autopilot from the autopilot pop-up.
The pop-up has a fixed position on the page, and it is available for all pages except when an
Autopilot panel is active.
As long as the autopilot pop-up is active, you cannot operate the background panel or its
menu.
You remove the pop-up from a page by selecting the X in the upper right corner. You turn it
on again by selecting the autopilot tile in the instrument bar.
The following pop-ups are available:
Autopilot controller, showing active mode,
heading, rudder and various steering
information depending on active autopilot
mode.
Manual adjustments to the set heading can
only be made when the port and starboard
arrow indicators are illuminated red and
green.
Mode selection, including access to turn
pattern selection
Turn pattern selection
Autopilot tile in Instrument bar
You can select to show the autopilot tile in the Instrument bar.
If the autopilot pop-up is turned off you can turn it on by selecting the tile in the Instrument
bar.
48 Autopilot | Zeus 2 Glass Helm