Bio-Rad Microplate Manager Software - Manual (Page 28)

Setting Up a Protocol
20
Exporting Custom Screening Reports (BSE, TSE,
TSE, NSP)
(Windows PC only, using Bio-Rad custom Excel templates BSE, TSE, TSE(NSP)…)
The Custom Export feature under File menu is for automatically exporting data and
generating a Screening Report for a series of Bio-Rad Platelia BSE and related
detection kits.
This Custom Export feature is used together with the BSE (and related) Protocols in
the Sample Protocol folder and the “Custom Templates” folder in the Microplate
Manager 6.2 folder. The BSE Custom Template is included with the Microplate
Manager 6.1 software, and Custom Templates for other kits can be purchased
separately.
These Custom Templates are for a Microsoft Excel workbook, with built-in
calculation functions for reporting the results from these kits. Microplate Manager
6.1 automatically generates a Screening Report using the data from a microplate
reading.
Procedure for Custom Export Reports
1. Prepare a 96-well microplate according to the instructions in the BSE (or
related) detection kit manual.
2. Open the corresponding BSE (or other) protocol (located in the Protocols
folder) in order to perform a dual wavelength (450-620 nm) read as
specified in the protocol.
3. If creating a new protocol, enter the requested label information (i.e.
Technician, Plate ID, etc.) in the window that appears. This information will
appear in the BSE report.
4. Read the Plate or Open a previously-read BSE plate.