Bio-Rad Microplate Manager Software - Manual (Page 93)

Appendix
85
3. Define the desired cutoffs in the Cutoffs Report Editor window.
Well identifiers used in the Cutoff Report Editor must be first
defined on the template.
User defined cutoffs are used in this data file.
• The Max High (++) is defined as ≥ 85% of the control (CNTRL)
for all samples.
• The High (POS) is defined as ≥ 75% of the control (CNTRL) for
all samples.
• The Low (NEG) is defined as ≤ 15% result value for all samples.
• The Max Low (--) is defined as ≤ 5% result value for all samples.