Bio-Rad Microplate Manager Software - Manual (Page 63)

Running Kinetic Assays
55
To zoom in on a single well or return to the display of the whole plate:
1. Right-click in the desired
plot.
2. Select Zoom In to see
large view or Zoom Out to
return to the whole plate.
To change the plot properties, such as
axes labels and scaling, click the
Customize Plot button.
Viewing Raw Data at
Kinetic Time Points
To see raw data values, go to the View menu and uncheck Show Kinetics to return
to the Raw Data matrix.
At each time point the raw data values for the entire plate can viewed.
Click on the times pulldown menu in the right corner of the matrix and select the
desired time point to view the raw data for that time.
This feature is useful to check the numerical
values for any of the data points in the kinetic
plots.
• To edit the initial kinetic plots, click
on the Edit Kinetic Plots icon and
enter the desire time and OD range.
Minimum or maximum time or OD values can be set to exclude a lag time or other
outlying data.